A power wheelchair that finally enables you to travel in a standard small car! CARONY GO will take you from your
home right into your car.
CARONY GO is a class B wheelchair with a user weight limit
of 120 kg. The chair is CE-labelled and approved to Swedish Handicap Institute requirements for power wheelchairs.
Approved by Motability.
A Turnout swivel base needs to be installed in the car, onto
which the power wheelchair seat slides from its wheel unit. CARONY GO can also be combined with a Turny car seat lift
for use in MPVs with higher floors. The wheelchair is easy and practical both in the home and outside on uneven surfaces.
The wheelchair’s wheel unit weighs 75 kg and can be lifted
into the vehicle’s boot using a wheelchair boot hoist, for
example Carolift 90. The Carolift 90, is fully powered and operated by a hand control (see photo series below right).
View our online films! You need Windows Media Player
installed on your computer. If the the film is not running
smoothly, right-click and "Save as" to view at your convenience.
See film (33 MB)
The Carony GO brochure The Carony GO accessories
Read about the Carony system
The history of Carony
You can set your wheelchair speed to fast
or slow using the ‘hare’
and ‘tortoise’ buttons.
This enables precision
in confined areas, and higher speed
(max. 6 km/h).
1. Start by turning the swivel base outwards using the hand control. Adjust the heigth of the wheel unit of Carony GO to the height of Turnout swivel base.
2. Dock the Carony wheel unit to the Turnout swivel base.
3. Push the seat across to the seat frame.
4. Loosen the Carony wheel unit ...
5. ... and turn the seat into its correct position in the car.
6. Store the wheel unit in the boot using the boot hoist Carolift.
You are ready to go!
Back